Curcumin,a Compound from Natural Sources,a True Scientific Challenge – A Review

Curcumin, a plant-derived polyphenolic compound, naturally present in turmeric (Curcuma longa), has been the subject of intensive investigations on account of its various activities. The implementation of safe, beneficial and highly functional compounds from natural sources in human nutrition/prevention/therapy requires some modifications in order to achieve their multi-functionality, improve their bioavailability and delivery strategies, with the main aim to enhance their effectiveness. The low aqueous solubility of curcumin, its rapid metabolism and elimination from the body, and consequently, poor bioavailability, constitute major obstacles to its application. The main objectives of this review are related to reported strategies to overcome these limitations and, thereby, improve the solubility, stability and bioavailability of curcumin. The effectiveness of curcumin could be greatly improved by using nanoparticle-based carriers. The significance of the quality of a substance delivery system is reflected in the fact that carrying curcumin as a food additive/nutrition also means carrying the active biological product/drug. This review summarizes the state of the art, and highlights some examples and the most significant advances in the field of curcumin research.     

Conductive 3D structure nanofibrous scaffolds for spinal cord regeneration

The complex nature of spinal cord injuries has provided much inspiration for the design of novel biomaterials and scaffolds which are capable of stimulating neural tissue repair strategies. Recently, conductive polymers have gained much attention for improving the nerve regeneration. In our previous study, a three-dimensional (3D) structure with reliable performance was achieved for electrospun scaffolds. The main purpose in the current study is formation of electrical excitable 3D scaffolds by appending polyaniline (PANI) to biocompatible polymers. In this paper, an attempt was made to develop conductive nanofibrous scaffolds, which can simultaneously present both electrical and topographical cues to cells. By using a proper 3D structure, two kinds of conductive scaffolds are compared with a non-conductive scaffold. The 3D nanofibrous core-sheath scaffolds, which are conductive, were prepared with nanorough sheath and aligned core. Two different sheath polymers, including poly(lactic-co-glycolic acid) PLGA and PLGA/PANI, with identical PCL/PANI cores were fabricated. Nanofibers of PCL and PLGA blends with PANI have fiber diameters of 234±60.8 nm and 770±166.6 nm, and conductivity of 3.17×10^-5 S/cm and 4.29×10^-5 S/cm, respectively. The cell proliferation evaluation of nerve cells on these two conductive scaffolds and previous non-conductive scaffolds (PLGA) indicate that the first conductive scaffold (PCL/ PANI-PLGA) could be more effective for nerve tissue regeneration. Locomotor scores of grafted animals by developed scaffolds showed significant performance of non-conductive 3D scaffolds. Moreover, the animal studies indicated the ability of two new types of conductive scaffolds as spinal cord regeneration candidates.     

Advances in Variable Rate Technology Application in Potato in The Netherlands

Precision agriculture is a farming management concept based on observing, measuring and responding to inter- and intra-field variability in crops. In this paper, we focus on responding to intra-field variability in potato crops and analyse variable rate applications (VRAs). We made an overview of potential VRAs in potato crop management in The Netherlands. We identified 13 potential VRAs in potato, ranging from soil tillage to planting to crop care to selective harvest. We ranked them on availability of ‘proof of concept’ and on-farm test results. For five VRAs, we found test results allowing to make a cost-benefit assessment. These five VRAs were as follows: planting, soil herbicide weed control, N side dress, late blight control and haulm killing. They use one of two types of spatial data: soil maps or biomass index maps. Data on costs and savings of the VRAs showed that the investments in VRAs will pay off under practical conditions in The Netherlands. Savings on pesticide use and N-fertilizer use with the VRAs were on average about 25%, which benefits the environment too. We foresee a slow but gradual adoption of VRAs in potato production. More VRAs will become available given ongoing R&D. The perspectives of VRAs in potatoes are discussed.     

Vacuum Drying for Extending Litchi Shelf-Life: Vitamin C,Total Phenolics,Texture and Shelf-Life Assessment

In an attempt to obtain shelf-stable litchi fruit with preserved nutritional quality and good sensory features, quarters of peeled and pitted fruits were vacuum dried at 50, 60 and 70 °C at a constant pressure of 8.0 kPa. The product was assessed for its vitamin C, total phenolics and texture (hardness). In addition, the product with the best texture was assessed for its shelf-life by means of accelerated testing. Results suggest that vacuum dried litchi retained almost 70% of the vitamin C and total phenolics when compared to frozen fruits (control). Vitamin C and phenolic compounds content significantly decreased with drying, while no difference was found between different drying temperatures. Hardness increased with drying temperature. The sample dried at 70 °C presented crispness, which is a desired quality feature in dried fruit products. This sample was subjected to shelf-life evaluation, whose result suggests a shelf-life of eight months at 23 °C. Total color change (CIE ΔE₀₀) was the expiry criterion. Vacuum drying was a suitable technique for producing shelf-stable litchi fruit with good texture while preserving its desirable original nutrients. Consumption of vacuum dried litchi may be beneficial to health due to its remarkable content of phenolic compounds and vitamin C.     

Effect of hybrid post treatments on the structural property and water flux of polysulfone hollow fiber membrane

The application of post treatments in preparation of high flux membranes is expanding rapidly. In this work, several hybrid post treatments have been introduced and used for change in the water flux of polysulfone (PSf) hollow fiber membranes. Dry wet spinning method was employed for fabrication of PSf hollow fiber membrane from spinning dope in mass ratio of 15:5:80 of PSf/PVP-K90/NMP. The simultaneous effects of single and hybrid post treatments containing traditional hypochlorite; high pressure injection technique (HPI) of hypochlorite, hot air and hot water treatments on the morphology and water flux of fabricated hollow fibers has been investigated. AFM analysis and image processing of SEM microphotographs of hollow fibers were used for structural studies. The mechanical properties of hollow fibers as well as strain at break and strength also were studied. It was found that the pores size and surface roughness parameter of hollow fiber membranes have been increased after traditional hypochlorite, HPI technique and hot water treatments while decreased when heat treated in air. In general all the employed hybrid post treatments caused to increase in the pores size of hollow fibers although the pores size increase rate in the membranes treated by the hybrid post treatments involving hot air was much lower than the others. The mechanical properties of hollow fibers have been decreased after hybrid and single post treatments containing traditional hypochlorite, HPI technique and hot water treatment while slightly increased after post treatments containing hot air. It was stated that the fabricated PSf hollow fibers were considerably affected by the employed hybrid post treatments. This can be attributed to the combine effects of used post treatments.     

Numerical analysis of injection molding for the Syringe Barrel with optimum design and processing condition

The numerical analysis was performed to predict the potential problem, often occurring during the manufacturing process of the disposable medical device of a great volume. The cavity filling analyses were performed for the new design of the 3cc Syringe Barrel using polypropylene(PP1), and a new nucleated polypropylene(PP2) material for better clarity. These analyses have been performed for different processing conditions as well as various wall thickness designs for both materials. With the nucleated material, only the original wall thickness design has been studied at two different processing conditions for comparison purpose. This study was conducted to investigate the optimum part design and processing condition for two different materials. The most desirable design was selected with Design 3 for material utilization and reduced flow stresses by comparing the field results. The new nucleated polypropylene provided slightly better product quality and processing.     

Isolation and characterization of nanocrystalline cellulose from different precursor materials

Nanocrytalline cellulose (NCC) was isolated using cellulose extracted from two different precursor materials: Eucalyptus globulus and rice straw. The two ground precursor materials were autoclaved with a 10 % NaOH solution at 120 °C for 3 h. The alkali-treated precursor materials were bleached using sodium chlorite/acetic acid and sodium hypochlorite. The bleached precursor materials were acid-hydrolyzed in 65 % (w/w) sulfuric acid at 45 °C for 30-120 min. The changes in the chemical composition of the two precursor materials were studied before and after bleaching by Fourier transform infrared spectroscopy according to the NREL report and TAPPI standards. Hydrolyzates were characterized by X-ray diffractometry, thermogravimetric analysis, Zeta-potential analysis, and transmission electron microscopy. The results revealed that the physical properties of NCC were strongly dependent on the acid-hydrolysis time.     

Modeling the water and nitrogen transports in a soil–paddy–atmosphere system using HYDRUS-1D and lysimeter experiment

Efficient water and fertilizer use is of paramount importance both in rain-fed and irrigated rice cultivation systems to tread off between the crop water demand during the dry spell and the fertilizer leaching. This lysimeter study on paddy in a lateritic sandy loam soil of the eastern India, to simulate the water and solute transports using the HYDRUS-1D model, reveals that this model could very well simulate the soil depth-specific variations of water pressure heads and nitrogen (N) concentrations with the efficiency of >86 and 89%, respectively. The change in the level of water ponding depth did not have a significant effect on the time to peak and the temporal variability of N concentration in the bottom soil layer. The lysimeter-scale water balance analysis indicated that the average deep percolation loss and crop water use were 35.01 ± 2.03 and 39.74 ± 1.49% of the total water applied during the crop growth period, respectively. Similarly, the amount of N stored in the plant and lost through soil storage, deep percolation, and other losses (mineralization, denitrification, and gaseous N loss to the atmosphere through plant leaves) were 1.60 ± 0.16, 0.17 ± 0.04, 12.00 ± 0.48, and 86.23 ± 0.41% of the total applied nitrogen, respectively. The simulation results reveal that a constant ponding depth of 3 cm could be maintained in paddy fields to reduce the N leaching loss to 7.5 kgN/ha.     

Structural and optical properties of cellulose nanocrystals isolated from the fruit shell of <Emphasis Type="Italic">Camellia oleifera</Emphasis> Abel

Cellulose nanocrystals (CNC) with high aspect ratio of 80 have been readily prepared from the inexpensive fruit shell of Camellia oleifera Abel (SCOA) for the first time. In this study, SOCA was consecutively subjected to alkali extraction, hydrogen peroxide bleaching and acid hydrolysis to remove non-cellulosic components and release CNC. The derived CNC possesses a needle-shaped structure that in average diameter and length of 6±2 nm and 500±100 nm, respectively. The crystallinity index of CNC increased to 72 % and the initial decomposition temperature raised to 230 oC. The obtained CNC was formed to nanopaper by vacuum filtration showing high visible light transmittance over 90 %. Thus SOCA derived CNC is of great practical potential to apply in the field of biomedicine, energy, packing, etc. Overall, this study is anticipated to offer new possibility for the CNC production from the inexpensive but abundant agricultural wastes.